-
●关于诚邀《粉煤灰综合利用》期(04月02日)
-
●非对称异性隧道联络通道冷冻法(07月24日)
-
●水泥夯土材料抗压强度试验及耐(08月25日)
-
●粉煤灰基超高性能混凝土配合比(07月25日)
-
●大体积混凝土配合比优化设计在(08月25日)
-
●变质岩类顺层边坡破裂迹象及边(07月25日)
-
●地铁车辆段检修库装配式混凝土(07月24日)
-
●变坡面浅埋偏压小净距隧道围岩(07月24日)
-
●大型十字交叉地铁车站结构地震(07月25日)
-
●自密实抑温防水复合材料在地下(08月25日)
-
●邯郸富水地层深基坑支护优化和(07月25日)
-
●养护方式对地聚物混凝土抗压强(04月24日)
-
●蒸压加气混凝土动态力学性能与(04月24日)
-
●CFRP 条带加固圆端形铝管(04月24日)
-
●地铁盾构隧道水泥基同步注浆减(03月05日)
-
●混凝土配合比优化及抗冻性能研(04月24日)
-
●硅灰-矿渣粉改性多孔透水混凝(04月24日)
-
●粉煤灰渣细骨料混凝土强度及耐(03月17日)
-
●纤维煤矸石基泡沫混凝土性能影(03月17日)
-
●侧向刚度与损伤作用下岩体强度(04月24日)
-
●碱激发对磷尾矿胶凝特性影响(04月24日)
PDF全文阅读
王 浩 ,顾炳伟 ,王景正
(江苏海洋大学 ,连云港 222000)
摘 要 :为了践行低碳环保政策 ,减少磷尾矿资源的堆积 ,增加磷尾矿资源的合理利用。通过对碱激发磷尾矿胶凝材料的凝结时间 、力学性能 、组成特征 、微观结构和水化热五种方法 ,对其力学性能做出判断。结果表明:碱激发对磷尾矿胶凝材料凝结时间影响与激发剂的类型密切相关。PTSC 配比比 PTSS 配比初凝时间平均减少 92 min , PTSC 配比的终凝时间随着氢氧化钠比例减少而延长 ,PTSS 配比的终凝时间随着碳酸钠比例减少而缩短。在复合激发条件下 ,氢氧化钠与硅酸钠的复合激发效果比碳酸钠与硅酸钠的混合激发效果好 ,形成的产物更丰富 、结构更密实。在氢氧化钠与硅酸钠混合比例为 1 : 6 时效果最好。不同碱激发剂配比对磷尾矿水化热的影响变化不大 ,磷尾矿极大的抑制了水化热的发生。所以碱激发可以促进磷尾矿力学性能的提升 ,尤其在使用硅酸钠和氢氧化钠混合激发时尤为明显。研究结果可为相关应用提供参考。
关键词:磷尾矿 ;碱激发 ;微观结构 ;水化 ;胶凝性能
中图分类号:TU526 文献标志码:A 文章编号: 1005- 8249 (2026) 02- 0021- 08
DOI:10. 19860/j.cnki.issn1005 - 8249.2026.02.004
Influence of Alkali Activation on the Gelling Properties of Phosphorus Tailings
WANG Hao , GU Bingwei , WANG Jingzheng
(Jiangsu Ocean University , Lianyungang 222000 , China)
Abstract : In order to implement the low - carbon and environmental protection policy , reduce the accumulation of phosphorus tailings resources and increase the rational utilization of phosphorus tailings resources , this paper judges the mechanical properties of alkali - activated phosphorus tailings cementitious materials through five methods : setting time , mechanical properties , composition characteristics , microstructure and hydration heat. The results show that the effect of alkali activation on the setting time of phosphorus tailings cementitious materials is closely related to the type of activator. The initial setting time
of the PTSC ratio is on average 92 minutes shorter than that of the PTSS ratio . The final setting time of the PTSC ratio is prolonged with the decrease of the sodium hydroxide ratio , while the final setting time of the PTSS ratio is shortened with the decrease of the sodium carbonate ratio . Under the condition of composite activation , the composite activation effect of sodium
hydroxide and sodium silicate is better than that of sodium carbonate and sodium silicate , and the formed products are more abundant and the structure is more compact. The best effect is achieved when the mixed ratio of sodium hydroxide and sodium silicate is 1 : 6 . The influence of different alkali activator ratios on the hydration heat of phosphorus tailings is not significant , and
phosphorus tailings greatly inhibit the occurrence of hydration heat. Therefore , alkali activation can promote the improvement of the mechanical properties of phosphorus tailings , especially when sodium silicate and sodium hydroxide are used. Research findings can provide references for related applications .
Key words : phosphate tailings; alkali activation; microstructure; hydration; cementing performance
作者简介: 王 浩 (2000—) , 男 ,硕士 ,研究方向:碱激发材料。
通信作者:顾炳伟 (1966—) , 男 ,博士 ,教授 ,研究方向:碱激发材料 、超高性能混凝土。
收稿日期:2025 - 04 - 18
冀公网安备13011002000529 技术支持:数字河北 