-
●我公司入选2024年度河北服(04月17日)
-
●我公司主编的《石家庄市房屋建(03月06日)
-
●我公司承担的课题“地下综合管(02月24日)
-
●我公司承接的阳原县开阳堡保护(02月21日)
-
●关于新广告法声明(07月25日)
-
●第十四届全国粉煤灰综合利用杂(07月16日)
-
●非对称异性隧道联络通道冷冻法(07月24日)
-
●水泥夯土材料抗压强度试验及耐(08月25日)
-
●变质岩类顺层边坡破裂迹象及边(07月25日)
-
●大体积混凝土配合比优化设计在(08月25日)
-
●粉煤灰基超高性能混凝土配合比(07月25日)
-
●大型十字交叉地铁车站结构地震(07月25日)
-
●邯郸富水地层深基坑支护优化和(07月25日)
-
●地铁车辆段检修库装配式混凝土(07月24日)
-
●自密实抑温防水复合材料在地下(08月25日)
-
●变坡面浅埋偏压小净距隧道围岩(07月24日)
-
●地铁车辆段检修库装配式混凝土(07月24日)
-
●邯郸富水地层深基坑支护优化和(07月25日)
-
●粉煤灰基超高性能混凝土配合比(07月25日)
-
●水泥夯土材料抗压强度试验及耐(08月25日)
-
●粉煤灰掺量对高层建筑筏板基础(06月26日)
-
●变坡面浅埋偏压小净距隧道围岩(07月24日)
-
●大型十字交叉地铁车站结构地震(07月25日)
-
●粉煤灰水泥土变形特性研究*(07月24日)
-
●氯盐渍土无侧限抗压强度及体变(06月25日)
-
●深水高墩大跨连续刚构桥抗震性(04月25日)

刘启超1 ,2 , 付素娟1 ,2 , 姜一天3 , 姜新佩4 , 王 钦5 , 张 娜6
(1 . 河北省建筑科学研究院有限公司 ,石家庄 050227 ; 2. 河北省装配式住宅工程研究中心(筹),石家庄 050227 ; 3 . 中国电建集团北京勘测设计研究院有限公司 ,北京 100024 ; 4. 河北工程大学 水电学院 ,邯郸 056000 ;
5 . 河北省住房和城乡建设厅信息宣传与档案中心 ,石家庄 050000 ;
6. 九易庄宸科技(集团) 股份有限公司 ,石家庄 050031)
摘 要: 由于现阶段装配式剪力墙结构在施工过程中存在的运输难 、安装难 、质量难把控等问题 ,设计了 一种新型装配式剪力墙无外伸钢筋的连接节点。为了全面评估该新型结构在受力与抗震方面的性能表现 ,开展 足尺试件的拟静力荷载试验 ,并建立有限元模型进行参数分析。结果表明:新型装配式剪力墙的滞回曲线 、骨 架曲线 、刚度退化曲线 、耗能能力等特征参数与现浇剪力墙类似。当贯通粗钢筋取 28 mm 时 ,新型装配式剪力 墙的承载力 、刚度和耗能能力等方面均优于现浇剪力墙 ,可以满足等同现浇的设计要求。
关键词:装配式 ;剪力墙结构 ;有限元模拟 ;抗震性能
中图分类号:TU37 文献标志码:A
文章编号: 1005- 8249 (2025) 03- 0156- 08
DOI:10. 19860/j.cnki.issn1005 - 8249.2025 .03 .028
LIU Qichao1,2,FU Sujuan1,2,JIANG Yitian3,JIANG Xinpei4,WANG Qin5,ZHANG Na6
(1. Hebei Academy of Building Research,Shijiazhuang 050227,China;2. Hebei Engineering Research Center of Prefabricated Housing(Preparation),Shijiazhuang 050227,China;3. Beijing Engineering Corporation Limited, Beijing 100024,China;4. School of Water Conservancy and Electric Power, Hebei University of Engineering,Handan 056000 China;5. Department of Housing and Rural Development.Hebei(Information Records Center),Shijiazhuang 050000,China;6. Jiuyizhuangchen Technology (Group) Co.,Ltd.,Shijiazhuang 050031,China)
Abstract:According to the problems of transportation, installation and quality control in the construction of prefabricated shear wall structure at this stage,In order to comprehensively evaluate the performance of the new structure in terms of stress and seismic resistance, full-scale quasi-static load tests were conducted on specimens, and a finite element model was established for parameter analysis. The research results indicate that the hysteresis curve, skeleton curve, stiffness degradation curve, energy dissipation capacity and other characteristic parameters of the new prefabricated shear wall are similar to those of cast-in-place shear walls. When the through thick steel bar is taken as 28 mm, the bearing capacity, stiffness, and energy dissipation capacity of the new prefabricated shear wall are superior to those of the cast-in-place shear wall, and can meet the design requirements equivalent to cast-in-place.
Keywords:assembled;shear wall structure;node analysis;finite element simulation;Seismic performance
基金项目:河北省创新能力提升计划项目 (225676160H) 。
作者简介:刘启超 (1990—) , 男 ,硕士 ,高级工程师 ,研究方向:装配式建筑结构节点连接。
通信作者: 张 娜 (1991 —) , 女 ,硕士 ,高级工程师 ,研究方向:建筑智能建造。
收稿日期:2023 - 09 - 01